Manual P/N 21008094 Rev. A 8/10 ATTENTION: Please take a few minutes to thoroughly read this user’s guide which should be saved for future reference
8. MaintenanceMove the CO Alarm to a remote location, to prevent possible damage or contamination of the sensor, prior to performing any of the follow
WelcomeNote: Many times throughout this User’s Guide, we will refer to Carbon Monoxide as “CO”.This Kidde carbon monoxide (CO) alarm is an important p
Important Warning StatementsWARNING: This product is intended for use in ordinary indoor locations of family living units. It is not designed to measu
1. Information About Carbon MonoxideCarbon Monoxide PPM Levels (model KN-COPP-B-LPM with digital display only)Model KN-COPP-B-LPM is equipped with a d
2. Product Features and SpecificationsGreen, Power LEDRed, Alarm LEDTest / Reset ButtonPeak Level ButtonDigital DisplayGreen, Power LEDRed, Alarm LEDT
Recommended Installation LocationsCO alarms should be mounted in or near bedrooms and living areas. It is recommended that you install a Kidde CO alar
Battery Installation and ReplacementTo install or replace the batteries in this Kidde CO alarm, please perform the following steps. 1. Slide open the
Whenever the alarm is operating, the green Power LED flashes every 30 seconds to indicate the unit is monitoring for CO. If the alarm senses dangerous
8. MaintenanceNOTE: This unit is sealed. The cover is not removable.Due to the loudness of the alarm, we suggest that you place your fingers over the
Commentaires sur ces manuels