SMOKE ALARM FEATURES•This smoke alarm is powered by 120V AC and a 9-volt battery back-upsource. AC/DC smoke alarms offer added protection in the event
REPAIR CAUTION: Do not attempt to repair this smokealarm. Doing so will void your warranty. If smoke alarm is not operating properly, see “TROUBLESHOO
PROBLEM SOLUTIONSmoke alarm does not 1. Check that AC power sound when tested. is turned on.2. Turn off power. Remove smokealarm from mounting plate a
WHERE TO SEND YOUR SMOKE ALARMFOR SERVICETo return smoke alarms under warranty, send the smoke alarm withpostage prepaid, a note describing the nature
IMPORTANT SAFETY INFORMATIONPLEASE READ AND SAVE THESE INSTRUCTIONSWARNING•This smoke alarm requires constant 120-volt, AC power AND aworking 9-volt b
fast-burning, explosive, or intentional. Others are caused by care-lessness or safety hazards. Smoke may not reach the smoke alarmQUICKLY ENOUGH to en
FOR BEST PROTECTION, WE RECOMMEND THAT YOU INSTALL A SMOKEALARM IN EVERY ROOM.In addition, we recommend that all smoke alarms be interconnected.Typica
IMPORTANT SMOKE ALARM PLACEMENT ANDEXCEPTION INFORMATION•Install a smoke alarm as close tothe center of the ceiling as possi-ble. If this is not pract
HOW TO INSTALLTHIS SMOKE ALARM DANGER: ELECTRICAL SHOCK HAZARD. Turn off power at the main fuse box or circuit breaker by removing the fuseor switchin
10. Position smoke alarm to mounting plate and turn clockwise tolock into place. For tamper-resist, use long-nosed pliers toremove thin plastic from n
FALSE ALARM CONTROLModel FADC features a False Alarm Control that, when activated,quiets unwanted alarms for up to 15 minutes.To use the False Alarm C
NOTE: If smoke alarms are interconnected, all smoke alarmsshould sound an alarm within three seconds after any testbutton is pushed and the tested smo
Commentaires sur ces manuels